Showing 10 of 12 results
This Letter presents a search for the production of a long-lived neutral particle ($Z_d$) decaying within the ATLAS hadronic calorimeter, in association with a Standard Model (SM) $Z$ boson produced via an intermediate scalar boson, where $Z\to l^+l^-$ ($l=e,\mu$). The data used were collected by the ATLAS detector during 2015 and 2016 $pp$ collisions with a center-of-mass energy of $\sqrt{s} = 13$ TeV at the Large Hadron Collider and corresponds to an integrated luminosity of $36.1\pm0.8$ fb$^{-1}$. No significant excess of events is observed above the expected background. Limits on the production cross section of the scalar boson times its decay branching fraction into the long-lived neutral particle are derived as a function of the mass of the intermediate scalar boson, the mass of the long-lived neutral particle, and its $c\tau$ from a few centimeters to one hundred meters. In the case that the intermediate scalar boson is the SM Higgs boson, its decay branching fraction to a long-lived neutral particle with a $c\tau$ approximately between 0.1 m and 7 m is excluded with a 95% confidence level up to 10% for $m_{Z_d}$ between 5 and 15 GeV.
The product of acceptance and efficiency for all signal MC samples.
A search is presented for the direct pair production of the stop, the supersymmetric partner of the top quark, that decays through an $R$-parity-violating coupling to a final state with two leptons and two jets, at least one of which is identified as a $b$-jet. The dataset corresponds to an integrated luminosity of 36.1 fb$^{-1}$ of proton-proton collisions at a center-of-mass energy of $\sqrt{s} = 13$ TeV, collected in 2015 and 2016 by the ATLAS detector at the LHC. No significant excess is observed over the Standard Model background, and exclusion limits are set on stop pair production at a 95% confidence level. Lower limits on the stop mass are set between 600 GeV and 1.5 TeV for branching ratios above 10% for decays to an electron or muon and a $b$-quark.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 600 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 600 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 600 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 600 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 700 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 700 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 700 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 700 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 800 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 800 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 800 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 800 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 900 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 900 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 900 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 900 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1000 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1000 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1000 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1000 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1050 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1050 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1050 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1050 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 600 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1100 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1100 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 600 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1100 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1100 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 700 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1150 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1150 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 700 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1150 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1150 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 800 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1200 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1200 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 800 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1200 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1200 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 900 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1250 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1250 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 900 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1250 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1250 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1000 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1300 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1300 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1000 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1300 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1300 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1050 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1350 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1350 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1050 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1350 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1350 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1100 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1400 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1400 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1100 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1400 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1400 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1150 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1450 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1450 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1150 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1450 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1450 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1200 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1500 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1500 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1200 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1500 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1500 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1250 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR800 signal region.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1250 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR1100 signal region.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR1100 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1300 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR800 signal region.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1300 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR1100 signal region.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR1100 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1350 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR800 signal region.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1350 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR1100 signal region.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR1100 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1400 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR800 signal region.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1400 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR1100 signal region.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR1100 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1450 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR800 signal region.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1450 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR1100 signal region.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR1100 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1500 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR800 signal region.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1500 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR1100 signal region.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR1100 signal region.
$m_{bl}^{0}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^{0}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^{0}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^\mathrm{asym}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^\mathrm{asym}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^\mathrm{asym}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$H_\mathrm{T}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$H_\mathrm{T}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$H_\mathrm{T}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{ll}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{ll}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{ll}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^{1}$(rej) distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^{1}$(rej) distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^{1}$(rej) distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
Full list of event selections and MC generator-weighted yields and efficiencies in the inclusive SR800 and SR1100 signal regions for several signal samples of varying stop mass with decay into b-electron, b-muon or b-tau at 1/3 branching ratio.
Full list of event selections and MC generator-weighted yields and efficiencies in the inclusive SR800 and SR1100 signal regions for several signal samples of varying stop mass with decay into b-electron, b-muon or b-tau at 1/3 branching ratio.
Full list of event selections and MC generator-weighted yields and efficiencies in the inclusive SR800 and SR1100 signal regions for several signal samples of varying stop mass with decay into b-electron, b-muon or b-tau at 1/3 branching ratio.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 600 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 600 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 700 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 700 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 800 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 800 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 900 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 900 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1000 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1000 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1050 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1050 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1100 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1100 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1150 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1150 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1200 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1200 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1250 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1250 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1300 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1300 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1350 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1350 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1400 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1400 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1450 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1450 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1500 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1500 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1550 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1550 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1600 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1600 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1350 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1350 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1400 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1400 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1450 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1450 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1500 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1500 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1550 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1550 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1600 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1600 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 600 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 600 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 700 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 700 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 800 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 800 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 900 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 900 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1000 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1000 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1050 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1050 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1100 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1100 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1150 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1150 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1200 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1200 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1250 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1250 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1300 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1300 GeV stop. All limits are computed at 95% CL.
A search for supersymmetric partners of top quarks decaying as $\tilde{t}_1\to c\tilde\chi^0_1$ and supersymmetric partners of charm quarks decaying as $\tilde{c}_1\to c\tilde\chi^0_1$, where $\tilde\chi^0_1$ is the lightest neutralino, is presented. The search uses 36.1 ${\rm fb}^{-1}$ $pp$ collision data at a centre-of-mass energy of 13 TeV collected by the ATLAS experiment at the Large Hadron Collider and is performed in final states with jets identified as containing charm hadrons. Assuming a 100% branching ratio to $c\tilde\chi^0_1$, top and charm squarks with masses up to 850 GeV are excluded at 95% confidence level for a massless lightest neutralino. For $m_{\tilde{t}_1,\tilde{c}_1}-m_{\tilde\chi^0_1}
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
A search for the supersymmetric partners of the Standard Model bottom and top quarks is presented. The search uses 36.1 fb$^{-1}$ of $pp$ collision data at $\sqrt{s}=13$ TeV collected by the ATLAS experiment at the Large Hadron Collider. Direct production of pairs of bottom and top squarks ($\tilde{b}_{1}$ and $\tilde{t}_{1}$) is searched for in final states with $b$-tagged jets and missing transverse momentum. Distinctive selections are defined with either no charged leptons (electrons or muons) in the final state, or one charged lepton. The zero-lepton selection targets models in which the $\tilde{b}_{1}$ is the lightest squark and decays via $\tilde{b}_{1} \rightarrow b \tilde{\chi}^{0}_{1}$, where $\tilde{\chi}^{0}_{1}$ is the lightest neutralino. The one-lepton final state targets models where bottom or top squarks are produced and can decay into multiple channels, $\tilde{b}_{1} \rightarrow b \tilde{\chi}^{0}_{1}$ and $\tilde{b}_{1} \rightarrow t \tilde{\chi}^{\pm}_{1}$, or $\tilde{t}_{1} \rightarrow t \tilde{\chi}^{0}_{1}$ and $\tilde{t}_{1} \rightarrow b \tilde{\chi}^{\pm}_{1}$, where $\tilde{\chi}^{\pm}_{1}$ is the lightest chargino and the mass difference $m_{\tilde{\chi}^{\pm}_{1}}- m_{\tilde{\chi}^{0}_{1}}$ is set to 1 GeV. No excess above the expected Standard Model background is observed. Exclusion limits at 95\% confidence level on the mass of third-generation squarks are derived in various supersymmetry-inspired simplified models.
- - - - - - - - - - - - - - - - - - - - <br/><b>Acceptance:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=Acceptance1">b0L-SRA350</a> <a href="79165?version=1&table=Acceptance2">b0L-SRA450</a> <a href="79165?version=1&table=Acceptance3">b0L-SRA550</a> <a href="79165?version=1&table=Acceptance4">b0L-SRB</a> <a href="79165?version=1&table=Acceptance5">b0L-SRC</a> <a href="79165?version=1&table=Acceptance6">b0L-best</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=Acceptance7">b1L-SRA300-2j</a> <a href="79165?version=1&table=Acceptance8">b1L-SRA450</a> <a href="79165?version=1&table=Acceptance9">b1L-SRA600</a> <a href="79165?version=1&table=Acceptance10">b1L-SRA750</a> <a href="79165?version=1&table=Acceptance11">b1L-SRB</a> <a href="79165?version=1&table=Acceptance12">b1L-best</a><br/><br/><b>Efficiency:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=Efficiency1">b0L-SRA350</a> <a href="79165?version=1&table=Efficiency2">b0L-SRA450</a> <a href="79165?version=1&table=Efficiency3">b0L-SRA550</a> <a href="79165?version=1&table=Efficiency4">b0L-SRB</a> <a href="79165?version=1&table=Efficiency5">b0L-SRC</a> <a href="79165?version=1&table=Efficiency6">b0L-best</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=Efficiency7">b1L-SRA300-2j</a> <a href="79165?version=1&table=Efficiency8">b1L-SRA450</a> <a href="79165?version=1&table=Efficiency9">b1L-SRA600</a> <a href="79165?version=1&table=Efficiency10">b1L-SRA750</a> <a href="79165?version=1&table=Efficiency11">b1L-SRB</a> <a href="79165?version=1&table=Efficiency12">b1L-best</a><br/><br/><b>Best SR Mapping:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=BestSR4">b0L</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=BestSR1">b1L</a> <a href="79165?version=1&table=BestSR2">b0L</a> <a href="79165?version=1&table=BestSR3">combined</a><br/><br/><b>Exclusion Contour:</b><br/><i>symmetric:</i> b0L-SRA350 <a href="79165?version=1&table=Contour1">exp</a> <a href="79165?version=1&table=Contour2">obs</a> b0L-SRA450 <a href="79165?version=1&table=Contour5">exp</a> <a href="79165?version=1&table=Contour6">obs</a> b0L-SRA550 <a href="79165?version=1&table=Contour9">exp</a> <a href="79165?version=1&table=Contour10">obs</a> b0L-SRB <a href="79165?version=1&table=Contour11">exp</a> <a href="79165?version=1&table=Contour12">obs</a> b0L-SRC <a href="79165?version=1&table=Contour15">exp</a> <a href="79165?version=1&table=Contour16">obs</a> b0L-best <a href="79165?version=1&table=Contour17">exp</a> <a href="79165?version=1&table=Contour18">obs</a><br/><i>asymmetric:</i> b0L-SRA350 <a href="79165?version=1&table=Contour3">exp</a> <a href="79165?version=1&table=Contour4">obs</a> b0L-SRA450 <a href="79165?version=1&table=Contour7">exp</a> <a href="79165?version=1&table=Contour8">obs</a> b0L-SRB <a href="79165?version=1&table=Contour13">exp</a> <a href="79165?version=1&table=Contour14">obs</a> b0L-best <a href="79165?version=1&table=Contour19">exp</a> <a href="79165?version=1&table=Contour20">obs</a> b1L-SRA300-2j <a href="79165?version=1&table=Contour21">exp</a> <a href="79165?version=1&table=Contour22">obs</a> b1L-SRA450 <a href="79165?version=1&table=Contour23">exp</a> <a href="79165?version=1&table=Contour24">obs</a> b1L-SRA600 <a href="79165?version=1&table=Contour25">exp</a> <a href="79165?version=1&table=Contour26">obs</a> b1L-SRA750 <a href="79165?version=1&table=Contour27">exp</a> <a href="79165?version=1&table=Contour28">obs</a> b1L-SRB <a href="79165?version=1&table=Contour29">exp</a> <a href="79165?version=1&table=Contour30">obs</a> b1L-best <a href="79165?version=1&table=Contour31">exp</a> <a href="79165?version=1&table=Contour32">obs</a> A-LowMass <a href="79165?version=1&table=Contour33">exp</a> <a href="79165?version=1&table=Contour34">obs</a> A-HighMass <a href="79165?version=1&table=Contour35">exp</a> <a href="79165?version=1&table=Contour36">obs</a> B combination <a href="79165?version=1&table=Contour37">exp</a> <a href="79165?version=1&table=Contour38">obs</a> Best combination <a href="79165?version=1&table=Contour39">exp</a> <a href="79165?version=1&table=Contour40">obs</a><br/><br/><b>SR Distribution:</b><br/><a href="79165?version=1&table=SRdistribution1">b0L-SRA</a>: $m_{\mathrm{CT}}$ <a href="79165?version=1&table=SRdistribution2">b0L-SRB</a>: $\mathrm{min[m_{T}(jet_{1-4}, E_{T}^{miss})]}$ <a href="79165?version=1&table=SRdistribution3">b0L-SRC</a>: ${\cal A}$ <a href="79165?version=1&table=SRdistribution4">b1L-SRA300-2j</a>: $\mathrm{m_{bb}}$ <a href="79165?version=1&table=SRdistribution5">b1L-SRA</a>: $\mathrm{m_{eff}}$ <a href="79165?version=1&table=SRdistribution6">b1L-SRB</a>: $\mathrm{m_{T}}$<br/><br/><b>Cross section upper limit:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=Limitoncrosssection1">b0L-best</a> <a href="79165?version=1&table=Limitoncrosssection2">b0L-SRA350</a> <a href="79165?version=1&table=Limitoncrosssection3">b0L-SRA450</a> <a href="79165?version=1&table=Limitoncrosssection4">b0L-SRA550</a> <a href="79165?version=1&table=Limitoncrosssection5">b0L-SRB</a> <a href="79165?version=1&table=Limitoncrosssection6">b0L-SRC</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=Limitoncrosssection7">b0L-best</a> <a href="79165?version=1&table=Limitoncrosssection8">b0L-SRA350</a> <a href="79165?version=1&table=Limitoncrosssection9">b0L-SRA450</a> <a href="79165?version=1&table=Limitoncrosssection10">b0L-SRB</a> <a href="79165?version=1&table=Limitoncrosssection11">b1L-best</a> <a href="79165?version=1&table=Limitoncrosssection12">b1L-SRA300-2j</a> <a href="79165?version=1&table=Limitoncrosssection13">b1L-SRA450</a> <a href="79165?version=1&table=Limitoncrosssection14">b1L-SRA600</a> <a href="79165?version=1&table=Limitoncrosssection15">b1L-SRA750</a> <a href="79165?version=1&table=Limitoncrosssection16">b1L-SRB</a> <a href="79165?version=1&table=Limitoncrosssection17">best combination</a> <a href="79165?version=1&table=Limitoncrosssection18">A-LowMass</a> <a href="79165?version=1&table=Limitoncrosssection19">A-HighMass</a> <a href="79165?version=1&table=Limitoncrosssection20">B combination</a><br/><br/><b>Cutflow:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=CutflowTable1">b0L-SRA (1 TeV, 1 GeV)</a> <a href="79165?version=1&table=CutflowTable2">b0L-SRB (700 GeV, 450 GeV)</a> <a href="79165?version=1&table=CutflowTable3">b0L-SRC (450 GeV, 430 GeV)</a><br/><i>mixed:</i> <a href="79165?version=1&table=CutflowTable4">b1L-SRA (700 GeV, 300 GeV)</a> <a href="79165?version=1&table=CutflowTable5">b1L-SRA300-2j (700 GeV, 300 GeV)</a> <a href="79165?version=1&table=CutflowTable6">b0L-SRA (700 GeV, 300 GeV)</a><br/><br/><b>Truth Code</b> and <b>SLHA Files</b> for the cutflows are available under "Resources" (purple button on the left)
- - - - - - - - - - - - - - - - - - - - <br/><b>Acceptance:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=Acceptance1">b0L-SRA350</a> <a href="79165?version=1&table=Acceptance2">b0L-SRA450</a> <a href="79165?version=1&table=Acceptance3">b0L-SRA550</a> <a href="79165?version=1&table=Acceptance4">b0L-SRB</a> <a href="79165?version=1&table=Acceptance5">b0L-SRC</a> <a href="79165?version=1&table=Acceptance6">b0L-best</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=Acceptance7">b1L-SRA300-2j</a> <a href="79165?version=1&table=Acceptance8">b1L-SRA450</a> <a href="79165?version=1&table=Acceptance9">b1L-SRA600</a> <a href="79165?version=1&table=Acceptance10">b1L-SRA750</a> <a href="79165?version=1&table=Acceptance11">b1L-SRB</a> <a href="79165?version=1&table=Acceptance12">b1L-best</a><br/><br/><b>Efficiency:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=Efficiency1">b0L-SRA350</a> <a href="79165?version=1&table=Efficiency2">b0L-SRA450</a> <a href="79165?version=1&table=Efficiency3">b0L-SRA550</a> <a href="79165?version=1&table=Efficiency4">b0L-SRB</a> <a href="79165?version=1&table=Efficiency5">b0L-SRC</a> <a href="79165?version=1&table=Efficiency6">b0L-best</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=Efficiency7">b1L-SRA300-2j</a> <a href="79165?version=1&table=Efficiency8">b1L-SRA450</a> <a href="79165?version=1&table=Efficiency9">b1L-SRA600</a> <a href="79165?version=1&table=Efficiency10">b1L-SRA750</a> <a href="79165?version=1&table=Efficiency11">b1L-SRB</a> <a href="79165?version=1&table=Efficiency12">b1L-best</a><br/><br/><b>Best SR Mapping:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=BestSR4">b0L</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=BestSR1">b1L</a> <a href="79165?version=1&table=BestSR2">b0L</a> <a href="79165?version=1&table=BestSR3">combined</a><br/><br/><b>Exclusion Contour:</b><br/><i>symmetric:</i> b0L-SRA350 <a href="79165?version=1&table=Contour1">exp</a> <a href="79165?version=1&table=Contour2">obs</a> b0L-SRA450 <a href="79165?version=1&table=Contour5">exp</a> <a href="79165?version=1&table=Contour6">obs</a> b0L-SRA550 <a href="79165?version=1&table=Contour9">exp</a> <a href="79165?version=1&table=Contour10">obs</a> b0L-SRB <a href="79165?version=1&table=Contour11">exp</a> <a href="79165?version=1&table=Contour12">obs</a> b0L-SRC <a href="79165?version=1&table=Contour15">exp</a> <a href="79165?version=1&table=Contour16">obs</a> b0L-best <a href="79165?version=1&table=Contour17">exp</a> <a href="79165?version=1&table=Contour18">obs</a><br/><i>asymmetric:</i> b0L-SRA350 <a href="79165?version=1&table=Contour3">exp</a> <a href="79165?version=1&table=Contour4">obs</a> b0L-SRA450 <a href="79165?version=1&table=Contour7">exp</a> <a href="79165?version=1&table=Contour8">obs</a> b0L-SRB <a href="79165?version=1&table=Contour13">exp</a> <a href="79165?version=1&table=Contour14">obs</a> b0L-best <a href="79165?version=1&table=Contour19">exp</a> <a href="79165?version=1&table=Contour20">obs</a> b1L-SRA300-2j <a href="79165?version=1&table=Contour21">exp</a> <a href="79165?version=1&table=Contour22">obs</a> b1L-SRA450 <a href="79165?version=1&table=Contour23">exp</a> <a href="79165?version=1&table=Contour24">obs</a> b1L-SRA600 <a href="79165?version=1&table=Contour25">exp</a> <a href="79165?version=1&table=Contour26">obs</a> b1L-SRA750 <a href="79165?version=1&table=Contour27">exp</a> <a href="79165?version=1&table=Contour28">obs</a> b1L-SRB <a href="79165?version=1&table=Contour29">exp</a> <a href="79165?version=1&table=Contour30">obs</a> b1L-best <a href="79165?version=1&table=Contour31">exp</a> <a href="79165?version=1&table=Contour32">obs</a> A-LowMass <a href="79165?version=1&table=Contour33">exp</a> <a href="79165?version=1&table=Contour34">obs</a> A-HighMass <a href="79165?version=1&table=Contour35">exp</a> <a href="79165?version=1&table=Contour36">obs</a> B combination <a href="79165?version=1&table=Contour37">exp</a> <a href="79165?version=1&table=Contour38">obs</a> Best combination <a href="79165?version=1&table=Contour39">exp</a> <a href="79165?version=1&table=Contour40">obs</a><br/><br/><b>SR Distribution:</b><br/><a href="79165?version=1&table=SRdistribution1">b0L-SRA</a>: $m_{\mathrm{CT}}$ <a href="79165?version=1&table=SRdistribution2">b0L-SRB</a>: $\mathrm{min[m_{T}(jet_{1-4}, E_{T}^{miss})]}$ <a href="79165?version=1&table=SRdistribution3">b0L-SRC</a>: ${\cal A}$ <a href="79165?version=1&table=SRdistribution4">b1L-SRA300-2j</a>: $\mathrm{m_{bb}}$ <a href="79165?version=1&table=SRdistribution5">b1L-SRA</a>: $\mathrm{m_{eff}}$ <a href="79165?version=1&table=SRdistribution6">b1L-SRB</a>: $\mathrm{m_{T}}$<br/><br/><b>Cross section upper limit:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=Limitoncrosssection1">b0L-best</a> <a href="79165?version=1&table=Limitoncrosssection2">b0L-SRA350</a> <a href="79165?version=1&table=Limitoncrosssection3">b0L-SRA450</a> <a href="79165?version=1&table=Limitoncrosssection4">b0L-SRA550</a> <a href="79165?version=1&table=Limitoncrosssection5">b0L-SRB</a> <a href="79165?version=1&table=Limitoncrosssection6">b0L-SRC</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=Limitoncrosssection7">b0L-best</a> <a href="79165?version=1&table=Limitoncrosssection8">b0L-SRA350</a> <a href="79165?version=1&table=Limitoncrosssection9">b0L-SRA450</a> <a href="79165?version=1&table=Limitoncrosssection10">b0L-SRB</a> <a href="79165?version=1&table=Limitoncrosssection11">b1L-best</a> <a href="79165?version=1&table=Limitoncrosssection12">b1L-SRA300-2j</a> <a href="79165?version=1&table=Limitoncrosssection13">b1L-SRA450</a> <a href="79165?version=1&table=Limitoncrosssection14">b1L-SRA600</a> <a href="79165?version=1&table=Limitoncrosssection15">b1L-SRA750</a> <a href="79165?version=1&table=Limitoncrosssection16">b1L-SRB</a> <a href="79165?version=1&table=Limitoncrosssection17">best combination</a> <a href="79165?version=1&table=Limitoncrosssection18">A-LowMass</a> <a href="79165?version=1&table=Limitoncrosssection19">A-HighMass</a> <a href="79165?version=1&table=Limitoncrosssection20">B combination</a><br/><br/><b>Cutflow:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=CutflowTable1">b0L-SRA (1 TeV, 1 GeV)</a> <a href="79165?version=1&table=CutflowTable2">b0L-SRB (700 GeV, 450 GeV)</a> <a href="79165?version=1&table=CutflowTable3">b0L-SRC (450 GeV, 430 GeV)</a><br/><i>mixed:</i> <a href="79165?version=1&table=CutflowTable4">b1L-SRA (700 GeV, 300 GeV)</a> <a href="79165?version=1&table=CutflowTable5">b1L-SRA300-2j (700 GeV, 300 GeV)</a> <a href="79165?version=1&table=CutflowTable6">b0L-SRA (700 GeV, 300 GeV)</a><br/><br/><b>Truth Code</b> and <b>SLHA Files</b> for the cutflows are available under "Resources" (purple button on the left)
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA350 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA350 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA450 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA450 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA550 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA550 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRB signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRB signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRC signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRC signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L- best expected signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L- best expected signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA300-2j signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA300-2j signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA450 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA450 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA600 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA600 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA750 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA750 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRB signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRB signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L- best expected signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L- best expected signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA350 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA350 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA450 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA450 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA550 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA550 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRB signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRB signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRC signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRC signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L- best expected signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L- best expected signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA300-2j signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA300-2j signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA450 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA450 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA600 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA600 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA750 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA750 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRB signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRB signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L- best expected signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L- best expected signal region.
b1L signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino.
b1L signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino.
b0L signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino.
b0L signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino.
combined signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino.
combined signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino.
b0L signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino.
b0L signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino.
Expected exclusion limit for b0L-SRA350 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRA350 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRA350 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRA350 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRA350 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b0L-SRA350 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b0L-SRA350 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRA350 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRA450 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRA450 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRA450 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRA450 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b0L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b0L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b0L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b0L-SRA550 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRA550 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRA550 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRA550 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRB for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRB for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRB for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRB for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b0L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b0L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b0L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b0L-SRC for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRC for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRC for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRC for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for best b0L SR for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for best b0L SR for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for best b0L SR for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for best b0L SR for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for best b0L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for best b0L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for best b0L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for best b0L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA300-2j for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA300-2j for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA300-2j for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA300-2j for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA600 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA600 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA600 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA600 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA750 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA750 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA750 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA750 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for best b1L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for best b1L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for best b1L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for best b1L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for A-LowMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for A-LowMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for A-LowMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for A-LowMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for A-HighMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for A-HighMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for A-HighMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for A-HighMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for B combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for B combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for B combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for B combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for best combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for best combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for best combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for best combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
$m_{\mathrm{CT}}$ distribution in b0L-SRA. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$m_{\mathrm{CT}}$ distribution in b0L-SRA. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{min[m_{T}(jet_{1-4}, E_{T}^{miss})]}$ distribution in b0L-SRB. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{min[m_{T}(jet_{1-4}, E_{T}^{miss})]}$ distribution in b0L-SRB. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
${\cal A}$ distribution in b0L-SRC. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
${\cal A}$ distribution in b0L-SRC. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{m_{bb}}$ distribution in b1L-SRA300-2j. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{m_{bb}}$ distribution in b1L-SRA300-2j. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{m_{eff}}$ distribution in b1L-SRA. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{m_{eff}}$ distribution in b1L-SRA. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{m_{T}}$ distribution in b1L-SRB. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{m_{T}}$ distribution in b1L-SRB. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
Cross section excluded at 95% CL for best b0L SR as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for b0L-SRA350 as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for b0L-SRA450 as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for b0L-SRA550 as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for b0L-SRB as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for b0L-SRC as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for best b0L SR as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b0L-SRA350 as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b0L-SRA450 as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b0L-SRB as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for best b1L SR as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b1L-SRA300-2j as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b1L-SRA450 as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b1L-SRA600 as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b1L-SRA750 as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b1L-SRB as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for best combination as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for A-LowMass combination as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for A-HighMass combination as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for B combination as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cutflow table in b0L-SRA for a pair produced bottom squark of 1 TeV decaying into a 1 GeV neutralino in a symmetric decay scenario.
Cutflow table in b0L-SRB for a pair produced bottom squark of 700 GeV decaying into a 450 GeV neutralino in a symmetric decay scenario.
Cutflow table in b0L-SRC for a pair produced bottom squark of 450 GeV decaying into a 430 GeV neutralino in a symmetric decay scenario.
Cutflow table in b1L-SRA for a pair produced bottom squark of 700 GeV decaying into a 300 GeV neutralino in a mixed decay scenario.
Cutflow table in b1L-SRA300-2j for a pair produced bottom squark of 700 GeV decaying into a 300 GeV neutralino in a mixed decay scenario.
Cutflow table in b0L-SRA for a pair produced bottom squark of 700 GeV decaying into a 300 GeV neutralino in a mixed decay scenario.
Searches for new phenomena in high-mass diphoton final states with the ATLAS experiment at the LHC are presented. The analysis is based on $pp$ collision data corresponding to an integrated luminosity of 36.7 fb$^{-1}$ at a centre-of-mass energy $\sqrt{s}=13$ TeV recorded in 2015 and 2016. Searches are performed for resonances with spin 0, as predicted by theories with an extended Higgs sector, and for resonances with spin 2, using a warped extra-dimension model as a benchmark model, as well as for non-resonant signals, assuming a large extra-dimension scenario. No significant deviation from the Standard Model is observed. Upper limits are placed on the production cross section times branching ratio to two photons as a function of the resonance mass. In addition, lower limits are set on the ultraviolet cutoff scale in the large extra-dimensions model.
Upper limits on the fiducial cross section times branching ratio to two photons at centre-of-mass energy of 13 TeV of a narrow-width (Γ_X = 4 MeV) spin-0 resonance as a function of its mass m_X.
Upper limits on the fiducial cross section times branching ratio to two photons at centre-of-mass energy of 13 TeV of a spin-0 resonance as a function of its mass m_X. The decay width of the resonance equals to 2% of m_X.
Upper limits on the fiducial cross section times branching ratio to two photons at centre-of-mass energy of 13 TeV of a spin-0 resonance as a function of its mass m_X. The decay width of the resonance equals to 6% of m_X.
Upper limits on the fiducial cross section times branching ratio to two photons at centre-of-mass energy of 13 TeV of a narrow-width (Γ_X = 4 MeV) spin-0 resonance as a function of its mass m_X.
Upper limits on the production cross section times branching ratio to two photons at centre-of-mass energy of 13 TeV of the lightest KK graviton as a function of its mass m_G* for k/MPl=0.01.
Upper limits on the production cross section times branching ratio to two photons at centre-of-mass energy of 13 TeV of the lightest KK graviton as a function of its mass m_G* for k/MPl=0.10. Only the limits derived with the asymptotic formulae are quoted here.
Upper limits on the production cross section times branching ratio to two photons at centre-of-mass energy of 13 TeV of the lightest KK graviton as a function of its mass m_G* for k/MPl=0.20.
Upper limits on the production cross section times branching ratio to two photons at centre-of-mass energy of 13 TeV of the lightest KK graviton as a function of its mass m_G* for k/MPl=0.30.
Distribution of the diphoton invariant mass for data events passing the spin-0 selection. The data points are plotted at the centre of each bin. The error bars indicate statistical uncertainties. The distribution consists of not only genuine diphoton events, but also events where at least one photon is faked by a jet. There is no data event above 2700 GeV.
Distribution of the diphoton invariant mass for data events passing the spin-2 selection. The data points are plotted at the centre of each bin. The error bars indicate statistical uncertainties. The distribution consists of not only genuine diphoton events, but also events where at least one photon is faked by a jet. There is no data event above 2700 GeV.
Fiducial acceptance and product of the fiducial acceptance times the combined reconstruction and identification efficiency as a function of the mass for a spin-0 resonant signal with narrow width under the spin-0 selection. Only MC statistical uncertainties are included.
Fiducial acceptance and product of the fiducial acceptance times the combined reconstruction and identification efficiency as a function of the mass for a spin-2 resonant signal with k/MPl=0.1 under the spin-2 selection. The definition of fiducial region is provided in JHEP 09 (2016) 001. Only MC statistical uncertainties are included.
Fiducial acceptance and product of the fiducial acceptance times the combined reconstruction and identification efficiency as a function of the mass for an ADD excess (GRW formalism), calculated as the difference between the sum of ADD and SM contributions (including their interference) and the SM contribution, under the spin-2 selection in the signal region M(gamma gamma)>2240 GeV. The definition of fiducial region is provided in JHEP 09 (2016) 001, and M(gamma gamma)>2240 GeV is required in addition. Only MC statistical uncertainties are included.
A search for massive coloured resonances which are pair-produced and decay into two jets is presented. The analysis uses 36.7 fb$^{-1}$ of $\sqrt{s}=$ 13 TeV pp collision data recorded by the ATLAS experiment at the LHC in 2015 and 2016. No significant deviation from the background prediction is observed. Results are interpreted in a SUSY simplified model where the lightest supersymmetric particle is the top squark, $\tilde{t}$, which decays promptly into two quarks through $R$-parity-violating couplings. Top squarks with masses in the range 100 GeV < $m_{\tilde{t}}$ < 410 GeV are excluded at 95% confidence level. If the decay is into a $b$-quark and a light quark, a dedicated selection requiring two $b$-tags is used to exclude masses in the ranges 100 GeV < $m_{\tilde{t}}$ < 470 GeV and 480 GeV < $m_{\tilde{t}}$ < 610 GeV. Additional limits are set on the pair-production of massive colour-octet resonances.
- - - - - - - - - - - - - - - - - - - - <p><b>Cutflows:</b><br> <a href="79059?version=1&table=CutflowTable1">Stop 100GeV</a><br> <a href="79059?version=1&table=CutflowTable2">Stop 500GeV</a><br> <a href="79059?version=1&table=CutflowTable3">Coloron 1500GeV</a><br> </p> <p><b>Event Yields:</b><br> <a href="79059?version=1&table=SRdistribution1">Inclusive stop SR</a><br> <a href="79059?version=1&table=SRdistribution2">Inclusive coloron SR </a><br> <a href="79059?version=1&table=SRdistribution3">b-tagged stop SR</a><br> </p> <p><b>Acceptances and Efficiencies:</b><br> <a href="79059?version=1&table=Acceptance1">Inclusive stop SR, before mass window</a><br> <a href="79059?version=1&table=Acceptance2">Inclusive stop SR, after mass window</a><br> <a href="79059?version=1&table=Acceptance3">Inclusive coloron SR, before mass window</a><br> <a href="79059?version=1&table=Acceptance4">Inclusive coloron SR, after mass window</a><br> <a href="79059?version=1&table=Acceptance5">b-tagged stop SR, before mass window</a><br> <a href="79059?version=1&table=Acceptance6">b-tagged stop SR, after mass window</a><br> </p> <p><b>Cross section upper limits:</b><br> <a href="79059?version=1&table=Limitoncrosssection1">Inclusive stop SR</a><br> <a href="79059?version=1&table=Limitoncrosssection2">Inclusive coloron SR</a><br> <a href="79059?version=1&table=Limitoncrosssection3">b-tagged stop SR</a><br> </p> <p><b>Truth Code</b> and <b>SLHA Files</b> for the cutflows are available under "Resources" (purple button on the left) </p>
Cutflow table for a pair produced top squark of 100 GeV decaying into a b- and an s-quark.
Cutflow table for a pair produced top squark of 500 GeV decaying into a b- and an s-quark.
Cutflow table for a pair produced coloron of 1500 GeV decaying into two quarks.
The observed number of data, background and top squark signal events in each of the signal regions of the inclusive selection
The observed number of data, background and coloron signal events in each of the signal regions of the inclusive selection
The observed number of data, background and top squark signal events in each of the signal regions of the b-tagged selection
Signal acceptance and efficiency (in %) as a function of M(STOP), before mass windows
Signal acceptance (in %) and efficiency as a function of M(STOP), after mass windows
Signal acceptance and efficiency (in %) as a function of M(RHO), before mass windows
Signal acceptance and efficiency (in %) as a function of M(RHO), after mass windows
Signal acceptance (in %) and efficiency as a function of M(STOP), before mass windows
Signal acceptance (in %) and efficiency as a function of M(STOP), after mass windows
Cross section excluded at 95% CL as a function of the top squark mass, for a pair produced top squark with decays into a pair of light-quarks.
Cross section excluded at 95% CL as a function of the cooron mass, for a pair produced coloron with decays into a pair of light-quarks.
Cross section excluded at 95% CL as a function of the top squark mass, for a pair produced top squark with decays into a b- and an s-quark.
Narrow resonances decaying into $WW$, $WZ$ or $ZZ$ boson pairs are searched for in 36.7 fb $^{-1}$ of proton-proton collision data at a centre-of-mass energy of $\sqrt{s}=13$ TeV recorded with the ATLAS detector at the Large Hadron Collider in 2015 and 2016. The diboson system is reconstructed using pairs of large-radius jets with high transverse momentum and tagged as compatible with the hadronic decay of high-momentum $W$ or $Z$ bosons, using jet mass and substructure properties. The search is sensitive to diboson resonances with masses in the range 1.2-5.0 TeV. No significant excess is observed in any signal region. Exclusion limits are set at the 95% confidence level on the production cross section times branching ratio to dibosons for a range of theories beyond the Standard Model. Model-dependent lower limits on the mass of new gauge bosons are set, with the highest limit set at 3.5 TeV in the context of mass-degenerate resonances that couple predominantly to bosons.
Upper limits at the 95% CL on the cross section times branching ratio for WW+WZ production as a function of V' mass
Signal acceptance times efficiency as a function of mass for Scalar → WW in the heavy scalar model
Upper limits at the 95% CL on the cross section times branching ratio for WW+ZZ production as a function of GKK mass for the bulk RS model with k/M̄Pl=1.
Signal acceptance times efficiency as a function of mass for Z' → WW in the HVT model
Upper limits at the 95% CL on the cross section times branching ratio for (c) WW+ZZ production as a function of scalar mass.
Signal acceptance times efficiency as a function of mass for GKK → WW in the bulk RS model
Dijet mass distributions for data in the (a) WW signal region.
Dijet mass distributions for data in the (a) WW signal region.
Dijet mass distributions for data in the (b) WZ signal region.
Dijet mass distributions for data in the (b) WZ signal region.
Dijet mass distributions for data in the (c) ZZ signal region.
Dijet mass distributions for data in the (c) ZZ signal region.
Dijet mass distributions for data in the (d) WZ+WW signal region.
Dijet mass distributions for data in the (d) WZ+WW signal region.
Dijet mass distributions for data in the (e) WW+ZZ signal region.
Dijet mass distributions for data in the (e) WW+ZZ signal region.
Signal acceptance times efficiency as a function of mass for Scalar → WW in the heavy scalar model
Upper limits at the 95% CL on the cross section times branching ratio for WW+WZ production as a function of V' mass
Signal acceptance times efficiency as a function of mass for Z' → WW in the HVT model
Upper limits at the 95% CL on the cross section times branching ratio for WW+ZZ production as a function of GKK mass for the bulk RS model with k/M̄Pl=1.
Signal acceptance times efficiency as a function of mass for GKK → WW in the bulk RS model
Upper limits at the 95% CL on the cross section times branching ratio for (c) WW+ZZ production as a function of scalar mass.
Upper limits at the 95% CL on the cross section times branching ratio for WW+ZZ production as a function of GKK mass for the bulk RS model with k/M̄Pl=0.5.
Upper limits at the 95% CL on the cross section times branching ratio for WW production as a function of V' mass
Upper limits at the 95% CL on the cross section times branching ratio for WW production as a function of V' mass
Upper limits at the 95% CL on the cross section times branching ratio for WZ production as a function of V' mass
Upper limits at the 95% CL on the cross section times branching ratio for WZ production as a function of V' mass
Upper limits at the 95% CL on the cross section times branching ratio for WW production as a function of GKK mass for the bulk RS model with k/M̄Pl=0.5.
Upper limits at the 95% CL on the cross section times branching ratio for WW production as a function of GKK mass for the bulk RS model with k/M̄Pl=0.5.
Upper limits at the 95% CL on the cross section times branching ratio for ZZ production as a function of GKK mass for the bulk RS model with k/M̄Pl=0.5.
Upper limits at the 95% CL on the cross section times branching ratio for ZZ production as a function of GKK mass for the bulk RS model with k/M̄Pl=0.5.
Upper limits at the 95% CL on the cross section times branching ratio for WW production as a function of GKK mass for the bulk RS model with k/M̄Pl=1.
Upper limits at the 95% CL on the cross section times branching ratio for WW production as a function of GKK mass for the bulk RS model with k/M̄Pl=1.
Upper limits at the 95% CL on the cross section times branching ratio for ZZ production as a function of GKK mass for the bulk RS model with k/M̄Pl=1.
Upper limits at the 95% CL on the cross section times branching ratio for ZZ production as a function of GKK mass for the bulk RS model with k/M̄Pl=1.
Upper limits at the 95% CL on the cross section times branching ratio for WW+ZZ production as a function of GKK mass for the bulk RS model with k/M̄Pl=0.5.
Upper limits at the 95% CL on the cross section times branching ratio for WW production as a function of scalar mass.
Upper limits at the 95% CL on the cross section times branching ratio for WW production as a function of scalar mass.
Upper limits at the 95% CL on the cross section times branching ratio for ZZ production as a function of scalar mass.
Upper limits at the 95% CL on the cross section times branching ratio for ZZ production as a function of scalar mass.
A search is presented for particles that decay producing a large jet multiplicity and invisible particles. The event selection applies a veto on the presence of isolated electrons or muons and additional requirements on the number of b-tagged jets and the scalar sum of masses of large-radius jets. Having explored the full ATLAS 2015-2016 dataset of LHC proton-proton collisions at $\sqrt{s}=13~\mathrm{TeV}$, which corresponds to 36.1 fb$^{-1}$ of integrated luminosity, no evidence is found for physics beyond the Standard Model. The results are interpreted in the context of simplified models inspired by R-parity-conserving and R-parity-violating supersymmetry, where gluinos are pair-produced. More generic models within the phenomenological minimal supersymmetric Standard Model are also considered.
Post-fit yields for each signal region in the multijets analysis. Summary of all 27 signal regions (post-fit).
Observed 95% CL limit for the pMSSM grid.
Observed 95% CL limit for the pMSSM grid when the signal cross section is increased by one standard deviation.
Observed 95% CL limit for the pMSSM grid when the signal cross section is decreased by one standard deviation.
Expected 95% CL limit for the pMSSM grid.
Expected 95% CL limit for the pMSSM grid with an up variation of the uncertainties.
Expected 95% CL limit for the pMSSM grid with a down variation of the uncertainties.
Observed 95% CL limit for the 2Step grid.
Observed 95% CL limit for the 2Step grid when the signal cross section is increased by one standard deviation.
Observed 95% CL limit for the 2Step grid when the signal cross section is decreased by one standard deviation.
Expected 95% CL limit for the 2Step grid.
Expected 95% CL limit for the 2Step grid with an up variation of the uncertainties.
Expected 95% CL limit for the 2Step grid with a down variation of the uncertainties.
Observed 95% CL limit for the gtt off-shell grid.
Observed 95% CL limit for the gtt off-shell grid when the signal cross section is increased by one standard deviation.
Observed 95% CL limit for the gtt off-shell grid when the signal cross section is decreased by one standard deviation.
Expected 95% CL limit for the gtt off-shell grid.
Expected 95% CL limit for the gtt off-shell grid with an up variation of the uncertainties.
Expected 95% CL limit for the gtt off-shell grid with a down variation of the uncertainties.
Observed 95% CL limit for the RPV grid.
Observed 95% CL limit for the RPV grid when the signal cross section is increased by one standard deviation.
Observed 95% CL limit for the RPV grid when the signal cross section is decreased by one standard deviation.
Expected 95% CL limit for the RPV grid.
Expected 95% CL limit for the RPV grid with an up variation of the uncertainties.
Expected 95% CL limit for the RPV grid with a down variation of the uncertainties.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-7j80-0b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-7j80-1b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-7j80-2b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-8j80-0b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-8j80-1b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-8j80-2b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-9j80-0b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-9j80-1b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-9j80-2b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-8j50-0b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-8j50-0b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-8j50-1b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-8j50-2b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-9j50-0b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-9j50-0b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-9j50-1b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-9j50-2b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-10j50-0b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-10j50-0b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-10j50-1b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-10j50-2b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-11j50-0b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-11j50-1b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
Number of signal events expected for 36.1 fb$^{-1}$ at different stages of the event selection for the signal region SR-11j50-2b in a pMSSM inspired model where m($\tilde{g}$) = 1400 GeV and m($\tilde{\chi}_{0}^{1}$) = 200 GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-8j50-0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-8j50-1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-8j50-2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-9j50-0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-9j50-1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-9j50-2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-10j50-0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-10j50-1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-10j50-2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-11j50-0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-11j50-1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-11j50-2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-7j80-0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-7j80-1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-7j80-2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-8j80-0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-8j80-1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-8j80-2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-9j80-0b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-9j80-1b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-9j80-2b. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-8j50-0b-MJ340. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-8j50-0b-MJ500. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-9j50-0b-MJ340. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-9j50-0b-MJ500. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-10j50-0b-MJ340. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
$E_{\mathrm{T}}^{\mathrm{miss}} / \sqrt{H_{\mathrm{T}}}$ distribution in signal region SR-10j50-0b-MJ500. Two benchmark signal models are overlaid on the plot for comparison. Labelled `pMSSM' and `2-step', they show signal distributions from the example SUSY models (as described in the paper): a pMSSM slice model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{\pm}}$) = (1300, 200) GeV and a cascade decay model with ($m \tilde{g}$, $m \tilde{\chi_{1}^{0}}$) = (1300, 200) GeV.
Degree of multijet closure for signal and vaidation regions (prior to the leptonic background fit) for the flavour stream with no b-jet requirement and a minimum transverse momentum of 50 GeV. The solid lines are the pre-fit predicted numbers of events and the points are the observed numbers. The blue hatched band shows only the statistical (MC and data) uncertainty on the background estimate. The template closure uncertainty for each SR bin is given by the maximal deviation of data from prediction in any non-SR bin to its left on this plot (although those for 80 GeV regions are independent of deviations in 50 GeV regions).
Degree of multijet closure for signal and vaidation regions (prior to the leptonic background fit) for the flavour stream with one inclusive b-jet required and a minimum transverse momentum of 50 GeV. The solid lines are the pre-fit predicted numbers of events and the points are the observed numbers. The blue hatched band shows only the statistical (MC and data) uncertainty on the background estimate. The template closure uncertainty for each SR bin is given by the maximal deviation of data from prediction in any non-SR bin to its left on this plot (although those for 80 GeV regions are independent of deviations in 50 GeV regions).
Degree of multijet closure for signal and vaidation regions (prior to the leptonic background fit) for the flavour stream with two inclusive b-jets required and a minimum transverse momentum of 50 GeV. The solid lines are the pre-fit predicted numbers of events and the points are the observed numbers. The blue hatched band shows only the statistical (MC and data) uncertainty on the background estimate. The template closure uncertainty for each SR bin is given by the maximal deviation of data from prediction in any non-SR bin to its left on this plot (although those for 80 GeV regions are independent of deviations in 50 GeV regions).
Degree of multijet closure for signal and vaidation regions (prior to the leptonic background fit) for the flavour stream with no b-jet requirement and a minimum transverse momentum of 80 GeV. The solid lines are the pre-fit predicted numbers of events and the points are the observed numbers. The blue hatched band shows only the statistical (MC and data) uncertainty on the background estimate. The template closure uncertainty for each SR bin is given by the maximal deviation of data from prediction in any non-SR bin to its left on this plot (although those for 80 GeV regions are independent of deviations in 50 GeV regions).
Degree of multijet closure for signal and vaidation regions (prior to the leptonic background fit) for the flavour stream with one inclusive b-jet required and a minimum transverse momentum of 80 GeV. The solid lines are the pre-fit predicted numbers of events and the points are the observed numbers. The blue hatched band shows only the statistical (MC and data) uncertainty on the background estimate. The template closure uncertainty for each SR bin is given by the maximal deviation of data from prediction in any non-SR bin to its left on this plot (although those for 80 GeV regions are independent of deviations in 50 GeV regions).
Degree of multijet closure for signal and vaidation regions (prior to the leptonic background fit) for the flavour stream with two inclusive b-jets required and a minimum transverse momentum of 80 GeV. The solid lines are the pre-fit predicted numbers of events and the points are the observed numbers. The blue hatched band shows only the statistical (MC and data) uncertainty on the background estimate. The template closure uncertainty for each SR bin is given by the maximal deviation of data from prediction in any non-SR bin to its left on this plot (although those for 80 GeV regions are independent of deviations in 50 GeV regions).
Degree of multijet closure for signal and vaidation regions (prior to the leptonic background fit) for the fat-jet stream with MJSigma above 340 GeV. The solid lines are the pre-fit predicted numbers of events and the points are the observed numbers. The blue hatched band shows only the statistical (MC and data) uncertainty on the background estimate. The template closure uncertainty for each SR bin is given by the maximal deviation of data from prediction in any non-SR bin to its left on this plot (although those for 80 GeV regions are independent of deviations in 50 GeV regions).
Degree of multijet closure for signal and vaidation regions (prior to the leptonic background fit) for the fat-jet stream with MJSigma above 500 GeV. The solid lines are the pre-fit predicted numbers of events and the points are the observed numbers. The blue hatched band shows only the statistical (MC and data) uncertainty on the background estimate. The template closure uncertainty for each SR bin is given by the maximal deviation of data from prediction in any non-SR bin to its left on this plot (although those for 80 GeV regions are independent of deviations in 50 GeV regions).
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the 2Step grid.
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the 2Step grid.
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the 2Step grid.
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the pMSSM grid.
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the pMSSM grid.
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the pMSSM grid.
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the RPV grid.
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the RPV grid.
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the RPV grid.
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the gtt off-shell grid.
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the gtt off-shell grid.
The best-expected signal region and the corresponding best-observed and best-expected CLs values for the gtt off-shell grid.
95% CLs observed upper limit on model cross-section (in fb) for 2Step signal points for the best-expected signal region.
95% CLs observed upper limit on model cross-section (in fb) for RPV signal points for the best-expected signal region.
95% CLs observed upper limit on model cross-section (in fb) for gtt off-shell signal points for the best-expected signal region.
Performance of the SR-8j50-0b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-8j50-0b-MJ340 for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-8j50-0b-MJ500 for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-8j50-1b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-8j50-2b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-9j50-0b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-9j50-0b-MJ340 for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-9j50-0b-MJ500 for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-9j50-1b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-9j50-2b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-10j50-0b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-10j50-0b-MJ340 for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-10j50-0b-MJ500 for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-10j50-1b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-10j50-2b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-11j50-0b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-11j50-1b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-11j50-2b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-7j80-0b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-7j80-1b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-7j80-2b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-8j80-0b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-8j80-1b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-8j80-2b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-9j80-0b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-9j80-1b for the 2Step grid: fractional acceptance; fractional efficiency.
Performance of the SR-9j80-2b for the 2Step grid: fractional acceptance; fractional efficiency.
This paper presents a search for direct electroweak gaugino or gluino pair production with a chargino nearly mass-degenerate with a stable neutralino. It is based on an integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ of $pp$ collisions at $\sqrt{s} = 13$ TeV collected by the ATLAS experiment at the LHC. The final state of interest is a disappearing track accompanied by at least one jet with high transverse momentum from initial-state radiation or by four jets from the gluino decay chain. The use of short track segments reconstructed from the innermost tracking layers significantly improves the sensitivity to short chargino lifetimes. The results are found to be consistent with Standard Model predictions. Exclusion limits are set at 95% confidence level on the mass of charginos and gluinos for different chargino lifetimes. For a pure wino with a lifetime of about 0.2 ns, chargino masses up to 460 GeV are excluded. For the strong production channel, gluino masses up to 1.65 TeV are excluded assuming a chargino mass of 460 GeV and lifetime of 0.2 ns.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (fb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (pb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (pb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (pb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
The generator-level acceptance after reconstruction, for selecting and reconstructing charginos as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the electroweak channel as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the electroweak channel as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the electroweak channel as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the electroweak channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the electroweak channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the electroweak channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The generator-level acceptance after reconstruction, for selecting and reconstructing charginos as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anticorrelation between different backgrounds.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anti-correlation between different backgrounds.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anti-correlation between different backgrounds.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anti-correlation between different backgrounds.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracket background events is small.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracklet background events is small.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracklet background events is small.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracklet background events is small.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
The result of a search for the pair production of the lightest supersymmetric partner of the bottom quark ($\tilde{b}_{1}$) using 139 fb$^{-1}$ of proton-proton data collected at $\sqrt{s} = 13$ TeV by the ATLAS detector is reported. In the supersymmetric scenarios considered both of the bottom-squarks decay into a $b$-quark and the second-lightest neutralino, $\tilde{b}_{1} \rightarrow b + \tilde{\chi}^{0}_{2}$. Each $\tilde{\chi}^{0}_{2}$ is assumed to subsequently decay with 100% branching ratio into a Higgs boson ($h$) like the one in the Standard Model and the lightest neutralino: $\tilde{\chi}^{0}_{2} \rightarrow h + \tilde{\chi}^{0}_{1}$. The $\tilde{\chi}^{0}_{1}$ is assumed to be the lightest supersymmetric particle (LSP) and is stable. Two signal mass configurations are targeted: the first has a constant LSP mass of 60 GeV; and the second has a constant mass difference between the $\tilde{\chi}^{0}_{2}$ and $\tilde{\chi}^{0}_{1}$ of 130 GeV. The final states considered contain no charged leptons, three or more $b$-jets, and large missing transverse momentum. No significant excess of events over the Standard Model background expectation is observed in any of the signal regions considered. Limits at the 95% confidence level are placed in the supersymmetric models considered, and bottom-squarks with mass up to 1.5 TeV are excluded.
Distributions of ${E}_{\mathrm{T}}^{\mathrm{miss}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of ${E}_{\mathrm{T}}^{\mathrm{miss}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of $m_{\mathrm{eff}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of $m_{\mathrm{eff}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of Object-based $E_{\mathrm{T}}^{\mathrm{miss}} {Sig.}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of Object-based $E_{\mathrm{T}}^{\mathrm{miss}} {Sig.}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of MaxMin alternative algorithm $m(h_{\mathrm{cand1}},h_{\mathrm{cand2}})_{\mathrm{avg}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of MaxMin alternative algorithm $m(h_{\mathrm{cand1}},h_{\mathrm{cand2}})_{\mathrm{avg}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of Leading jet $p_T$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of Leading jet $p_T$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of MaxMin algorithm $m_{hcand}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of MaxMin algorithm $m_{hcand}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Signal efficiency in SRA_M_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_M_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal acceptance in SRC_28 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_28 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_26 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_26 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_24 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_24 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_M_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_M_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRB for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRB for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_L_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_L_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_incl for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_incl for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_L_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_L_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_incl_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_incl_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_incl_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_incl_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal efficiency in SRA_H_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_H_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_L_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_L_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRB for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRB for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal acceptance in SRC_22 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_22 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal efficiency in SRA_H_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_H_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_24 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_24 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_26 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_26 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal acceptance in SRA_H_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_H_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal efficiency in SRA_incl_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_incl_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_22 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_22 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal acceptance in SRA_M_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_M_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal efficiency in SRC_28 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_28 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal acceptance in SRA_H_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_H_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal efficiency in SRA_incl_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_incl_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_L_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_L_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_M_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_M_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_incl for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_incl for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Observed 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Observed 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Expected 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Expected 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Observed 95% CLs exclusion limit for the $M(\widetilde{\chi}_{1}^{0})$=60GeV signal grid for the best combined signal regions.
Observed 95% CLs exclusion limit for the $M(\widetilde{\chi}_{1}^{0})$=60GeV signal grid for the best combined signal regions.
Expected 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Expected 95% CLs exclusion limit for the $M(\widetilde{\chi}_{1}^{0})$=60GeV signal grid for the best combined signal regions.
Model dependent upper limit on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid
Model dependent upper limit on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid
Model dependet upper limits on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid
Model dependet upper limits on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid
Result of background only fit applied to signal regions. Event yields from the signal regions compared with SM MC predictions for the 3 highest contributing backgrounds separately and combined minor backgrounds.
Result of background only fit applied to signal regions. Event yields from the signal regions compared with SM MC predictions for the 3 highest contributing backgrounds separately and combined minor backgrounds.
Expected background event yields and dominant systematic uncertainties on background estimates in the A-type (inclusive), B-type and C-type (inclusive) regions.
Expected background event yields and dominant systematic uncertainties on background estimates in the A-type (inclusive), B-type and C-type (inclusive) regions.
Background-only fit results for the A- and B-type regions performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.
Background-only fit results for the A- and B-type regions performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.
Background-only fit results for the C-type region performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.
Background-only fit results for the C-type region performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.
Observed 95% CL upper limits on the visible cross sections σvis, the observed (S95obs) and expected (S95exp) 95% CL upper limits on the number of signal events with ± 1 σ excursions of the expectation, the CL of the background-only hypothesis, CLB, the discovery p-value (p0), truncated at 0.5, and the associated significance.
Observed 95% CL upper limits on the visible cross sections σvis, the observed (S95obs) and expected (S95exp) 95% CL upper limits on the number of signal events with ± 1 σ excursions of the expectation, the CL of the background-only hypothesis, CLB, the discovery p-value (p0), truncated at 0.5, and the associated significance.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRA selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1100, 330, 200)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRA selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1100, 330, 200)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRB selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (700, 680, 550)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRB selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (700, 680, 550)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRC selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1200, 1150, 60)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRC selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1200, 1150, 60)$ GeV, considered.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But sometimes you may wish to be more specific. Here we show you how.
Guidance on the query string syntax can also be found in the OpenSearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.