Showing 10 of 34 results
We present measurements of the total production rates and momentum distributions of the charmed baryon $\Lambda_c^+$ in $e^+e^- \to$ hadrons at a center-of-mass energy of 10.54 GeV and in $\Upsilon(4S)$ decays. In hadronic events at 10.54 GeV, charmed hadrons are almost exclusively leading particles in $e^+e^- \to c\bar{c}$ events, allowing direct studies of $c$-quark fragmentation. We measure a momentum distribution for $\Lambda_c^+$ baryons that differs significantly from those measured previously for charmed mesons. Comparing with a number of models, we find none that can describe the distribution completely. We measure an average scaled momentum of $\left< x_p \right> = 0.574\pm$0.009 and a total rate of $N_{\Lambda c}^{q\bar{q}} = 0.057\pm$0.002(exp.)$\pm$0.015(BF) $\Lambda_c^+$ per hadronic event, where the experimental error is much smaller than that due to the branching fraction into the reconstructed decay mode, $pK^-\pi^+$. In $\Upsilon (4S)$ decays we measure a total rate of $N_{\Lambda c}^{\Upsilon} = 0.091\pm$0.006(exp.)$\pm$0.024(BF) per $\Upsilon(4S)$ decay, and find a much softer momentum distribution than expected from B decays into a $\Lambda_c^+$ plus an antinucleon and one to three pions.
LAMBDA/C+ differential production rate per hadronic event for the continuum at cm energy 10.54 GeV.
The integrated number of LAMBDA/C+'s per hadronic event for the continuum at cm energy 10.54 GeV.
LAMBDA/C+ differential production rate per UPSILON(4S) decay at cm energy 10.58 GeV.
The integrated number of LAMBDA/C+'s per UPSILON(4S) event at cm energy 10.58 GeV.
The PHENIX experiment has measured mid-rapidity transverse momentum spectra (0.4 < p_T < 4.0 GeV/c) of single electrons as a function of centrality in Au+Au collisions at sqrt(s_NN) = 200 GeV. Contributions to the raw spectra from photon conversions and Dalitz decays of light neutral mesons are measured by introducing a thin (1.7% X_0) converter into the PHENIX acceptance and are statistically removed. The subtracted ``non-photonic'' electron spectra are primarily due to the semi-leptonic decays of hadrons containing heavy quarks (charm and bottom). For all centralities, charm production is found to scale with the nuclear overlap function, T_AA. For minimum-bias collisions the charm cross section per binary collision is N_cc^bar/T_AA = 622 +/- 57 (stat.) +/- 160 (sys.) microbarns.
Value of the Alpha power as used in a fit of dN/dy versus Ncoll of the form A*Ncoll^Alpha, where N is the non photonic electron yield and Ncoll the number of p+p collisions This value only includes data from Au+Au collisions The value of Alpha = 1 is the expectation in the absence of medium effects.
Value of the Alpha power as used in a fit of dN/dy versus Ncoll, of the form A*Ncoll^Alpha, where N is the non photonic electron yield and Ncoll the number of p+p collisions This value is calculated including previous data of p+p collisions, measured by PHENIX, in addition of the Au+Au data The value of Alpha = 1 is the expectation in the absence of medium effects.
Spectrum in transverse momentum of electrons created in open heavy flavor decays, for minimum bias events.
Spectrum in transverse momentum of electrons created in open heavy flavor decays, for 0-10% centrality.
Spectrum in transverse momentum of electrons created in open heavy flavor decays, for 10-20% centrality.
Spectrum in transverse momentum of electrons created in open heavy flavor decays, for 20-40% centrality.
Spectrum in transverse momentum of electrons created in open heavy flavor decays, for 40-60% centrality.
Spectra in transverse momentum of electrons created in open heavy flavor decays, for 60-92% centrality.
Non photonic electrons differential yield scaled by the number of collisions, as a function of centrality. PT belongs to 0.8-4.0 GeV/c.
Non photonic electrons differential yield scaled by the number of collisions, for minimum bias collisions. PT belongs to 0.8-4.0 GeV/c.
Number of collisions as a fonction of centrality There are only systematic errors due to the calculation of Ncoll.
Number of collisions for minimum bias events There are only systematic errors due to the calculation of Ncoll.
Nuclear overlap function TAA as a function of centrality The axis is labelled with 1/SIG, because the unit of the nuclear overlap function is barn-1 There are only systematic errors due to the calculation of TAA.
Nuclear overlap function TAA for minimum bias events The axis is labelled with 1/SIG, as the unit of the nuclear overlap function is barn-1 There are only systematic errors due to the calculation of TAA.
Differential charm cross section scaled by the number of collisions, at mid rapidity, as a function of centrality The differential cross section per number of collisions D(SIG)/Ncoll is calculated as following : D(SIG)/Ncoll = D(N(cc_bar))/TAA.
Differential charm cross section scaled by the number of collisions, at mid rapidity, for minimum bias events The differential cross section per number of collisions D(SIG)/Ncoll is calculated as following : D(SIG)/Ncoll = D(N(cc_bar))/TAA.
Total charm cross section scaled by the number of collisions, as a function of centrality The total cross section per number of collisions SIG/Ncoll is calculated as following : SIG/Ncoll = N(cc_bar)/TAA.
Total charm cross section scaled by the number of collisions, for minimum bias events The total cross section per number of collisions SIG/Ncoll is calculated as following : SIG/Ncoll = N(cc_bar)/TAA.
We present the first measurement of photoproduction of J/psi and of two-photon production of high-mass e+e- pairs in electromagnetic (or ultra-peripheral) nucleus-nucleus interactions, using Au+Au data at sqrt(s_NN) = 200 GeV. The events are tagged with forward neutrons emitted following Coulomb excitation of one or both Au^{star} nuclei. The event sample consists of 28 events with m_{e+e-} > 2 GeV/c^2 with zero like-sign background. The measured cross sections at midrapidity of d\sigma / dy (J/psi + Xn, y=0) = 76 +/- 33 (stat) +/- 11 (syst) micro b and d^2\sigma/dm dy (e^+e^- + Xn, y=0) = 86 +/- 23 (stat) +/- 16 (syst) micro b/(GeV/c^2) for m_{e+e-} \in [2.0,2.8] GeV/c^2 are consistent with various theoretical predictions.
J/PSI N for ultra peripheral Au+Au reactions. The values has been obtained from the fit of the number of counts as a function of the mass of the e+e- pairs detected. The J/PSI pick has been fixed at the known mass ofJ/PSI : 3.097 GeV/c2.
e+e- pairs N in ultra peripherals Au + Au reactions. The values has been obtained from the fit of the number of counts as a function of the mass of the e+e- pairs.The results are given for 3 intervals of masses of the electron pair : 2.0 to 2.3, 2.3 to 2.8 and 2.0 to 2.8 Gev/c2.
J/PSI production cross section at mid rapidity for ultra peripheral Au+Au reactions.
e+e- production cross section at mid rapidity for ultra peripheral Au+Au reactions.The results are given for 3 intervals of masses of the electron pair : 2.0 to 2.3, 2.3 to 2.8 and 2.0 to 2.8 Gev/c2.
Dijet angular distributions from the first LHC pp collisions at center-of-mass energy sqrt(s) = 7 TeV have been measured with the ATLAS detector. The dataset used for this analysis represents an integrated luminosity of 3.1 pb-1. Dijet $\chi$ distributions and centrality ratios have been measured up to dijet masses of 2.8 TeV, and found to be in good agreement with Standard Model predictions. Analysis of the $\chi$ distributions excludes quark contact interactions with a compositeness scale $\Lambda$ below 3.4 TeV, at 95% confidence level, significantly exceeding previous limits.
CHI distribution for mass bin 340 to 520 GeV.
CHI distribution for mass bin 520 to 800 GeV.
CHI distribution for mass bin 800 to 1200 GeV.
CHI distribution for mass bin > 1200 GeV.
Centrality Ratio.
A search for new heavy particles manifested as resonances in two-jet final states is presented. The data were produced in 7 TeV proton-proton collisions by the Large Hadron Collider (LHC) and correspond to an integrated luminosity of 315 nb^-1 collected by the ATLAS detector. No resonances were observed. Upper limits were set on the product of cross section and signal acceptance for excited-quark (q*) production as a function of q* mass. These exclude at the 95% CL the q* mass interval 0.30 < mq* < 1.26 TeV, extending the reach of previous experiments.
The dijet mass distribution (NUMBER OF EVENTS).
95 PCT CL upper limit of the cross section x acceptance.
A search for pair production of fourth-generation sequential leptons in e+e− annihilation at a center-of-mass energy s=56 GeV is reported. Event topologies corresponding to the cases where one particle decays leptonically while the other decays hadronically as well as those where both particles decay hadronically were explored. We set a 95%-confidence-level lower limit of 27.6 GeV/c2 for the mass of a fourth-generation lepton.
No description provided.
We report the double helicity asymmetry, $A_{LL}^{J/\psi}$, in inclusive $J/\psi$ production at forward rapidity as a function of transverse momentum $p_T$ and rapidity $|y|$. The data analyzed were taken during $\sqrt{s}=510$ GeV longitudinally polarized $p
$A_{LL}^{J/\psi}$ as a function of $p_T$ or $|y|$. $N_{J/\psi}^{2\sigma}$ is the $J/\psi$ counting within its $2\sigma$ mass window. The column of Type A systematic uncertainties are a statistically weighted quadratic combination of the background fraction and run grouping uncertainties. $\Delta A_{LL}$ (Rel. Lumi.) is the global systematic uncertainty from relative luminosity measurements. $\Delta A_{LL}$ (Polarization) is the systematic uncertainty from the beam polarization measurement: a zero indicates an uncertainty $< 0.001$.
A search for long-lived particles decaying into hadrons is presented. The analysis uses 139 fb$^{-1}$ of $pp$ collision data collected at $\sqrt{s} = 13$ TeV by the ATLAS detector at the LHC using events that contain multiple energetic jets and a displaced vertex. The search employs dedicated reconstruction techniques that significantly increase the sensitivity to long-lived particles decaying in the ATLAS inner detector. Background estimates for Standard Model processes and instrumental effects are extracted from data. The observed event yields are compatible with those expected from background processes. The results are used to set limits at 95% confidence level on model-independent cross sections for processes beyond the Standard Model, and on scenarios with pair-production of supersymmetric particles with long-lived electroweakinos that decay via a small $R$-parity-violating coupling. The pair-production of electroweakinos with masses below 1.5 TeV is excluded for mean proper lifetimes in the range from 0.03 ns to 1 ns. When produced in the decay of $m(\tilde{g})=2.4$ TeV gluinos, electroweakinos with $m(\tilde\chi^0_1)=1.5$ TeV are excluded with lifetimes in the range of 0.02 ns to 4 ns.
Validation of background estimate in validation regions for the High-pT jet selections
Validation of background estimate in validation regions for the Trackless jet selections
Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the High-pT jet SR for observed data events
Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the High-pT jet SR for expected signal events in the strong gluino pair pair production model with m(gluino)=1.8 TeV, m(chi0)=0.2 TeV, tau(chi0)=0.1 ns
Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the Trackless jet SR for observed data events
Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the Trackless jet SR for expected signal events in the electroweak pair production model
Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models
Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV
Exclusion limits at 95% CL on the production cross section in the electroweak pair production model.
Exclusion limits at 95% CL on the production cross section in the strong gluino pair production models and m(gluino)=2.4 TeV
Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV
Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV
Expected exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Observed exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV
Expected exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Observed exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV
Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns
Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns
Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns
Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns
Exclusion limits at 95% CL on the production cross section in the strong gluino pair production models and m($ ilde{\chi}^0_1$)=1.25 TeV
Acceptance cutflow for the High-pT SR for representative points in the strong gluino pair production model. See additional resources for more information.
Acceptance cutflow for the Trackless SR for representative points in the electroweak pair production model. See additional resources for more information.
Acceptance cutflow for the Trackless SR for representative points in the electroweak pair production model with heavy-flavor quarks final state. See additional resources for more information.
Acceptance cutflow for the High-pT SR for representative points in the electroweak pair production model with heavy-flavor quarks final state. See additional resources for more information.
Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R < 1150 mm
Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R [1150, 3870] mm
Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R > 3870 mm
Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R < 1150 mm
Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R [1150, 3870] mm
Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R > 3870 mm
Reinterpretation Material: Vertex-level Efficiency for R < 22 mm
Reinterpretation Material: Vertex-level Efficiency for R [22, 25] mm
Reinterpretation Material: Vertex-level Efficiency for R [25, 29] mm
Reinterpretation Material: Vertex-level Efficiency for R [29, 38] mm
Reinterpretation Material: Vertex-level Efficiency for R [38, 46] mm
Reinterpretation Material: Vertex-level Efficiency for R [46, 73] mm
Reinterpretation Material: Vertex-level Efficiency for R [73, 84] mm
Reinterpretation Material: Vertex-level Efficiency for R [84, 111] mm
Reinterpretation Material: Vertex-level Efficiency for R [111, 120] mm
Reinterpretation Material: Vertex-level Efficiency for R [120, 145] mm
Reinterpretation Material: Vertex-level Efficiency for R [145, 180] mm
Reinterpretation Material: Vertex-level Efficiency for R [180, 300] mm
Cutflow (acceptance x efficiency) for the High-pT SR for representative points in the strong gluino pair production model. See additional resources for more information.
Cutflow (acceptance x efficiency) for the Trackless SR for representative points in the electroweak pair production model. See additional resources for more information.
Cutflow (acceptance x efficiency) for the Trackless SR for representative points in the electroweak pair production model with heavy-flavor quarks. See additional resources for more information.
Cutflow (acceptance x efficiency) for the High-pT SR for representative points in the electroweak pair production model with heavy-flavor quarks. See additional resources for more information.
This paper presents a search for dark matter, $\chi$, using events with a single top quark and an energetic $W$ boson. The analysis is based on proton-proton collision data collected with the ATLAS experiment at $\sqrt{s}=$ 13 TeV during LHC Run 2 (2015-2018), corresponding to an integrated luminosity of 139 fb$^{-1}$. The search considers final states with zero or one charged lepton (electron or muon), at least one $b$-jet and large missing transverse momentum. In addition, a result from a previous search considering two-charged-lepton final states is included in the interpretation of the results. The data are found to be in good agreement with the Standard Model predictions and the results are interpreted in terms of 95% confidence-level exclusion limits in the context of a class of dark matter models involving an extended two-Higgs-doublet sector together with a pseudoscalar mediator particle. The search is particularly sensitive to on-shell production of the charged Higgs boson state, $H^{\pm}$, arising from the two-Higgs-doublet mixing, and its semi-invisible decays via the mediator particle, $a$: $H^{\pm} \rightarrow W^\pm a (\rightarrow \chi\chi)$. Signal models with $H^{\pm}$ masses up to 1.5 TeV and $a$ masses up to 350 GeV are excluded assuming a tan$\beta$ value of 1. For masses of $a$ of 150 (250) GeV, tan$\beta$ values up to 2 are excluded for $H^{\pm}$ masses between 200 (400) GeV and 1.5 TeV. Signals with tan$\beta$ values between 20 and 30 are excluded for $H^{\pm}$ masses between 500 and 800 GeV.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 0L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 1L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Only signals simulating the tW+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_a$ vs. $m_{H^{\pm}}$ and assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 150 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The observed exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
The expected exclusion contour at 95% CL as a function of the $m_{H^{\pm}}$ vs. tan$\beta$ and assuming $m_a$ = 250 $\mathrm{GeV}$, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Masses that are within the contours are excluded. Signals simulating the tW+DM + tt+DM final states are considered in this contour. These exclusion contours are derived using the 2L channel only.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.7$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Only signals simulating the tW+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_a$ vs. $ m_{H^{\pm}}$ signal grid assuming tan$\beta$ = 1, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 150 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
Model dependent upper limit on the cross section for the $m_{H^{\pm}}$ vs. tan$\beta$ signal grid assuming $m_a$ = 250 GeV, $m_{\mathrm{DM}} = 10 \mathrm{GeV}$, $g_{\chi} = 1$ and sin$\theta = 0.35$. Signals simulating the tW+DM + tt+DM final states are considered. Upper limits with large $\mu_{\mathrm{sig}}$ for the observed limit are capped at 500.
The distributions of $m_{\mathrm{b1},\mathrm{W-tagged}}$ in the 0L inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
The distributions of $m_{\mathrm{T}}^{\mathrm{b,E_{\mathrm{T}^{\mathrm{miss}}}}}$ in the 0L inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
The distributions of $N_{\mathrm{W-tagged}}$ in the 0L inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
The distributions of $m_{\mathrm{b1},\mathrm{\cancel{b1}}}$ in the hadronic top inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
The distributions of $m_{\mathrm{b1},\mathrm{\cancel{b1}}}$ in the leptonic top inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
The distributions of $m_{\mathrm{b1},\mathrm{\cancel{b1}}}$ in the leptonic top inclusive signal region. For each bin yields for the data and total SM prediction are provided. The SM prediction is provided with the total uncertainty, including the MC statistical uncertainty, detector-related systematic uncertainties and theoretical uncertainties. The rightmost bin includes overflow events.
Cutflow for the reference point $(\it{m}_{\mathrm{H^{\pm}}}, \it{m}_{a}, tan\beta, sin\theta )=$ (500,100,1,0.7) , (800,150,20,0.7), (600,250,30,0.7), (1000,400,1,0.7) in 0L regions. Results are shown including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$.
Cutflow for the reference point $(\it{m}_{\mathrm{H^{\pm}}}, \it{m}_{a}, tan\beta, sin\theta )=$ (500,100,1,0.7) , (800,150,20,0.7), (600,250,30,0.7), (1000,400,1,0.7) in 1L leptonic top regions. Results are shown including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$.
Cutflow for the reference point $(\it{m}_{\mathrm{H^{\pm}}}, \it{m}_{a}, tan\beta, sin\theta )=$ (500,100,1,0.7) , (800,150,20,0.7), (600,250,30,0.7), (1000,400,1,0.7) in 1L hadronic top regions. Results are shown including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$.
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.7. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 0L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_a$--m$_{H^{\pm}}$ assuming tan$\beta$ = 1, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 150 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
Signal acceptance in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in the 1L region for 2HDM+a model DM signals on the plane defined by m$_{H^{\pm}}$--tan$\beta$ assuming m$_a$ = 250 GeV, m$_{\chi}$= 10 GeV and sin$\theta$ = 0.35. Please mind that the efficiency given in the table is multiplied by factor of $10^{2}$
The results of a search for gluino and squark pair production with the pairs decaying via the lightest charginos into a final state consisting of two $W$ bosons, the lightest neutralinos ($\tilde\chi^0_1$), and quarks, are presented. The signal is characterised by the presence of a single charged lepton ($e^{\pm}$ or $\mu^{\pm}$) from a $W$ boson decay, jets, and missing transverse momentum. The analysis is performed using 139 fb$^{-1}$ of proton-proton collision data taken at a centre-of-mass energy $\sqrt{s}=13$ TeV delivered by the Large Hadron Collider and recorded by the ATLAS experiment. No statistically significant excess of events above the Standard Model expectation is found. Limits are set on the direct production of squarks and gluinos in simplified models. Masses of gluino (squark) up to 2.2 TeV (1.4 TeV) are excluded at 95% confidence level for a light $\tilde\chi^0_1$.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Expected 95% CL exclusion contours for the squark one-step variable-x
Expected 95% CL exclusion contours for the squark one-step variable-x
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the TR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Post-fit $m_{eff}$ distribution in the WR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the TR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the WR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J discovery high region for squark production one-step variable-x simplified models
Signal efficiency in SR2J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J discovery low region for squark production one-step variable-x simplified models
Signal efficiency in SR2J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But sometimes you may wish to be more specific. Here we show you how.
Guidance on the query string syntax can also be found in the OpenSearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.